Tools by Exten
Exten's Mack Truck King Pin Cap Tool Kit
Application Instructions
Front Axle Thrust Bearing Adjustment
Screw & Thread Chasing
The following information is provided to familiarize with the proper use of Exten's new patent pending tool kit.
The tools for installing and removing adjustment screws are designed to be used with a 3/4" drive impact gun.
CAUTION
Always make sure the cross pattern is fully engaged in the adjustment screw.
The tools for clearing or chasing the threads are designed to be used with a broken bar or ratchet with extension.
CAUTION
Never use the thread chasers with impact tools. Damage to spindle assembly threads may occur.
Part Numbers As Follows
Click on underlined part number for picture
X10-KR17B
Adjustment Screw Tool for 10,500 lb & 12,000 lb Axles
X10-KR25B
Adjustment Screw Tool for 16,000 lb, 18,000 lb & 20,000 lb Axles
X10-TC17B
Thread Chaser for 10,500 lb & 12,000 lb Axles
X10-TC25B
Thread Chaser for 16,000 lb, 18,000 lb & 20,000 lb Axles
X10-KR84B
Tool Kit Containing All Of The Above
Exten, Inc.
50 Stradtman Street
Buffalo, New York 14206-1908
Local: (716) 895-2214
Phone: (800) 551-5004
Fax: (800) 666-5004
